White Balance

Preset White Balance Settings
Here are some of the basic White Balance settings you’ll find on cameras:

• Auto – this is where the camera makes a best guess on a shot by shot basis. You’ll find it works in many situations but it’s worth venturing out of it for trickier lighting.
• Tungsten – this mode is usually symbolized with a little bulb and is for shooting indoors, especially under tungsten (incandescent) lighting (such as bulb lighting). It generally cools down the colors in photos.
• Fluorescent – this compensates for the ‘cool’ light of fluorescent light and will warm up your shots.
• Daylight/Sunny – not all cameras have this setting because it sets things as fairly ‘normal’ white balance settings.
• Cloudy – this setting generally warms things up a touch more than ‘daylight’ mode.
• Flash – the flash of a camera can be quite a cool light so in Flash WB mode you’ll find it warms up your shots a touch.
• Shade – the light in shade is generally cooler (bluer) than shooting in direct sunlight so this mode will warm things up a little.

       [click for better view]

Tips For Using White Balance

Different settings change the amount of orange or blue color cast, usually to compensate for any cast in the lighting. If you have no blue or orange cast you get neutral whites, which is what you usually get if you use the settings suggested by the instruction book. The Fluorescent settings take out the green from Fluorescent, mercury, HMI and metal halide lights used in your garage, sports stadia and parking lots. Forget about shooting under orange street lights: they’ll always look orange because they are orange. White balance only adjusts far enough to make lights that look white to us look white in photos.


In the AUTO mode the camera makes its best guess for each shot. I use the AUTO white balance mode when I can. It works great in my Nikon D70 and Canon A70, but poorly in my Nikon D1H. Even though it may or may not work well for normal photos, AUTO (also called AWB in Canon) almost always works great for under weird mixed artificial lighting without flash.

- AUTO (also called AWB) mode works OK with flash and indoors and outdoors. Usually the images will still be fairly blue in shade and pleasantly warm indoors at night. When the flash is on most cameras automatically switch to flash white balance.

The fun starts when you take it out of AUTO and set it yourself. Here’s what the other settings do:

- Tungsten (symbol of a light bulb also called “indoor”): Very, very blue most of the time except indoors at night, for which it looks normal. “Tungsten” is the name of the metal out of which the bulb’s filament is made. Even indoors many people prefer the warmer AUTO setting. TRICK: Set -1 or -2 exposure compensation and use this setting in daylight to simulate night! In Hollywood we call this “day for night.”

- Daylight (symbol of a sun): Bluish normal. This is a little bit bluer than I usually prefer. Only use it for shooting test charts in direct sunlight.

- Cloudy (symbol of a cloud): I prefer this. It’s a little warmer than the daylight setting and best for most shots outdoors in direct sunlight. Why not the daylight setting? The camera manuals are written by engineers, not artists. The engineers are interested in copying color test charts, not making a good photo. I prefer things on the warmer side.

- Flash (symbol of a lighting bolt): Almost identical to cloudy but sometimes redder depending on the camera. Use this the same way. On Nikons like the D70 you usually can set separate fine-tuned adjustments for each setting, so you can set different adjustments under cloudy and flash for quick access. This is optimized for the little on-camera flashes that tend to be blue, thus this setting tends to be warm to compensate. With large studio strobes you probably don’t want to use this, since the images may be too red. Try the Daylight setting to match carefully daylight balanced studio strobes.

- Shade (symbol of a house casting a shadow): Very orange. This is perfect for shooting in shade, since shade is so blue. It’s also for shooting when you are under a cloud on a partly cloudy day since most of the light is coming from the blue sky. It’s also for shooting in backlight, again since the subject is lit more by the blue sky instead of the direct sunlight. TIP: Some cameras skip this critical setting. If so, manually set the CUSTOM preset while in shade (also called one-push, Manual and white card and other things depending on manufacturer) and use this setting in place of the missing shade setting. TIP: I often use this mode even in direct sun when I want to make things look warm and inviting. Try it and you’ll probably love it. The SHADE setting is a professional secret for getting great images, pass it on!

- Fluorescent (symbol of a long rectangle or Fluorescent tube): Use this if your photos are too green or under Fluorescent, mercury, HMI or metal halide lights as you might find in street lights. It will make other things look a bit purplish. With Nikons the fine-tuning adjustment (+-3) is much stronger in this setting and adjusts from fairly warm to fairly cool. Because of this you may not be able to get the exact color you want under Fluorescent lighting, in which case try AUTO or preset.

- Fine Tuning (+3 to -3): Color is critical. The basic settings above get you close, but probably not exactly what you want. These fine adjustments allow you to get the exact amount of coolness or warmth. + is cooler and – is warmer. Nikons allow you to adjust this and remembers your preference for every setting while the Canons often skip this. Without the ability to fine tune these settings I find the Canon Rebel, 300D and 10D cameras not very useful. One can even fine tune Nikon’s AUTO setting. Most photos on my D70 are made in AUTO -3.

- Manual, Custom or Preset (sometimes a symbol with a dot and two triangles): This allows you to point the camera at something you want to be neutral and it makes it that way. Read the manual to your camera for specifics. Usually the camera sets itself to what’s in front of you. Some cameras also can set themselves to something in an image shot previously. TRICK: Set it pointed at something colored or through a colored filter and your resulting photos will have a color cast opposite the color to which you set it! Set it on something blue and photos come out yellow, set it on something purple and the photos come out green. Point it at something warm and you get cool and vice versa.

This Tutorial is brought to you by Mie Eim